Connecting network cables
LiveCapture includes Gigabit Ethernet ports and Integrated Remote Access Controller (iDRAC) ports used for remotely accessing and troubleshooting LiveCapture. See Front / rear panels for the location of these ports. For information on using iDRAC, see Integrated Remote Access Controller (iDRAC).
To connect network cables:
• Use a standard Ethernet cable to connect these ports to your network.
TIP: To reach LiveCapture through an SSH connection, you can use an Ethernet cable connected directly between the Gigabit Ethernet port on LiveCapture and your PC or laptop. LiveCapture eth0 port is configured at the factory with a default static IP address of 192.168.1.21. The PC or laptop must be configured to be on the same IP subnet.